- Home »
- Catalog
Petty's Garage » 2020, Ford, Mustang EcoBoost, 2.3
Products for:
- Years: 2020
- Makes: Ford
- Models: Mustang EcoBoost
- Liters: 2.3
View Universal items for: 2020 Ford Mustang EcoBoost 2.3
Browse Products
Floor Mat Set
Description: Made Of Natural Heavy Duty Rubber Deeply Sculpted Channels Designed To Trap Water/Road Salt/Mud And Sand Made Of 16 lbs. Of Pliable Natural Rubber Will Not Curl/Crack/Harden In Sub-Zero...More Details »
Item #: 446991
Condition:
New
Limited Supply: Only 5 Left!
Price: $139.95
Seat Cover
Description: Universal Seat Protector
Universal Seat Protector; Black; Fits Vehicles w/Bucket Seats
Item #: SPB002CH
Condition:
New
Price: $161.95
Engine Intake Manifold Gasket Set
Description: Upper Lower Manifold Gasket Premium Gasket Material To Ensue Leak Free Seal Fits All Ford 302/351 BBK SSI Intake Manifolds Port Matched For Optimum Air Flow Sold As A Pair Designed For...More Details »
Item #: 1601
Condition:
New
Limited Supply: Only 1 Left!
Price: $24.99
Computer Chip Programmer
Description: The Trinity Comes Preloaded With Canned Tunes Full Color Touch-Screen Customizable Gauge Layouts Programmable LED Lights 5 Volt Input
inTune i3 Platinum Performance Programmer; Preloaded...More Details »
Item #: 8145
Condition:
New
Coming Soon
Price: $377.96
Computer Chip Programmer
Description: Full-Color High Resolution 5 In. Touch Screen Internet Updateable In Cabin Display Full Re-Flash/Program Capability Advanced Data Acquisition Up To +100HP/250 ft./lb. Torque On Diesel Apps....More Details »
Item #: 9145
Condition:
New
Coming Soon
Price: $627.26
Spark Plug
Description: Patented DiamondFIRE Ground Electrode Edge-To-Edge Ground Electrode Out Performs Other Plug Designs E3 Equipped Engines Can Minimize Venting Of Unburned Fuel Burn Fuel More Efficiently By...More Details »
Item #: E3.74
Condition:
New
Price: $6.99
Exhaust System Kit
Description: Mandrel Bent Tubing Limited Lifetime Warranty Aggressive Exterior Exhaust Tone Dyno Tuned for Maximum Performance Premium Flowmaster Quality Made in the USA
American Thunder Axle Back...More Details »
Item #: 817807
Condition:
New
Limited Supply: Only 3 Left!
Price: $999.95
Exhaust Crossover Pipe
Description: Stainless Steel Dyno Tuned for Maximum Performance Mandrel Bent Tubing Lifetime Limited Warranty Made in the USA
Scavenger X-Pipe Kit; 2.25 in. Tubing; 409 Stainless Steel More Details »
Item #: 81108
Condition:
New
Limited Supply: Only 4 Left!
Price: $361.95
Computer Chip Programmer
Description: Includes PCM With Ford Performance Calibration Includes Electronic Throttle Control Accelerator Pedal Unique Control Pack Harness Replaces Stock Body Harness OBD-II Diagnostic Port To Assist...More Details »
Item #: M-6017-M50B
Condition:
New
Not Available
Computer Chip Programmer
Description: Includes PCM With Ford Performance Calibration Includes Electronic Throttle Control Accelerator Pedal Unique Control Pack Harness Replaces Stock Body Harness OBD-II Diagnostic Port To Assist...More Details »
Item #: M-6017-M50BA
Condition:
New
Not Available
Computer Chip Programmer
Description: Includes PCM With Ford Performance Calibration HEGO Sensors Electronic Throttle Control Accelerator Pedal Unique Control Pack Harness OBD-II Diagnostic Port To Assist In Vehicle Calibration...More Details »
Item #: M-6017-M50BAA
Condition:
New
Not Available
Engine Intake Manifold
Description: Made From Lightweight Composite Material Calibration Not Included Improved Lid Stiffness Runners Are Tuned For 7750 RPM Peak Power Designed And Tested To 20 PSI Intake Gaskets Included...More Details »
Item #: M-9424-M50CJB
Condition:
New
Limited Supply: Only 1 Left!
Price: $1,358.99
Engine Oil Separator
Description: Precision Molded Canister w/Unique Filter Media Highly Engineered System; Not A Universal -Fits-All- Kit Canister Is Easy To Drain Engineered And Manufactured In The USA
Oil-Air Separator;...More Details »
Item #: M-6766-A50A
Condition:
New
Limited Supply: Only 7 Left!
Price: $200.99
Seat
Description: Original Equipment On 2020 GT500 Carbon Fiber Track Package No Cutting Or Welding Required Kit Includes All Hardware Off Road Use Only
Seat Delete Kit; Rear
Item #: M-6346612-GT
Condition:
New
Limited Supply: Only 1 Left!
Price: $854.99
Spoiler
Description: Spoiler
Spoiler; Rear; Incl. Gurney Flap
Item #: M-16600-FP
Condition:
New
Limited Supply: Only 2 Left!
Price: $552.99
Suspension Body Lowering Kit
Description: Designed To Work With Production Struts; Shocks And Sway Bars Lowers Car Approximately 1.0 in. Gives A More Aggressive-Looking Stance Increased Handling Dynamics Yet Maintains Excellent Ride...More Details »
Item #: M-5300-XA
Condition:
New
Limited Supply: Only 1 Left!
Price: $360.99
Fuel Injector Rail
Description: Fit All 2011+ Naturally Aspirated Coyote Engines 5.0/5.2 L Machined Billet Extrusions w/Laser Etched Holley EFI Logo Clip Feature Retained So Factory Injector Clips Can Be Re-used 1/8 NPT...More Details »
Item #: 534-283
Condition:
New
Limited Supply: Only 1 Left!
Price: $213.95
Air Intake Kit
Description: Patented Slip-Seal Housing-Filter-Tube Interface 1 Piece Fully Sealed Intake Housing For Max Air Flow/Efficiency Utilizes Fact. Mounting Locations For Simple Secure Installation High...More Details »
Item #: 223-11
Condition:
New
Not Available
Air Intake Kit
Description: Increased Power Throughout The Entire RPM Range Stainless Steel Hose Clamps Patent Pending Styled To Enhance The Look Of Your Engine Peak Gains 12.3 HP/13.5 lbs./ft. Torque Unique Patented...More Details »
Item #: 223-15
Condition:
New
Not Available
Fuel Injection Throttle Body
Description: Cable Operated Throttle Body Available In 90mm Opening Adjustable Throttle Stop High Quality Billet Aluminum Construction Available In Two Finishes Silver Or Black Anodized Laser Engraved...More Details »
Item #: 860009
Condition:
New
Not Available
Fuel Injection Throttle Body
Description: Cable Operated Throttle Body Available In 90mm Opening Adjustable Throttle Stop High Quality Billet Aluminum Construction Available In Two Finishes Silver Or Black Anodized Laser Engraved...More Details »
Item #: 860010
Condition:
New
Limited Supply: Only 2 Left!
Price: $313.95
Fuel Injection Throttle Body Spacer
Description: Includes Mounting Hardware And O-ring Machined From Billet Aluminum Spacer Measures Approximately .375 In Thickness
Throttle Body Spacer; Fits w/2011-Up Ford Coyote 5.0L V8 Engines; 3/8 in....More Details »
Item #: 860003
Condition:
New
Not Available
Ignition Crank Trigger Kit
Description: Easy Install As Traditional Msd Crank Trigger Kits Most Accurate Way To Trigger Your Electronic Fuel Injection Is Less Susceptible To Noise Interference Powerful Magnets Are Embedded Rigid...More Details »
Item #: 86401
Condition:
New
Limited Supply: Only 2 Left!
Price: $545.95
Catalytic Converter
Description: Stainless Steel Construction Federal Emissions Compliant Designed Meets EPA Requirements
Universal Catalytic Converter-2.50in.
Item #: 51356
Condition:
New
Limited Supply: Only 3 Left!
Price: $202.00
Fuel Injection Throttle Control Actuator Module
Description: Increase Vehicle Acceleration And Reduce Lag Time Change Your Performance As You Go With The Control Knob Fully Waterproof With Oem Quality Connectors
Burst Throttle Booster
Item #: 49000
Condition:
New
Limited Supply: Only 2 Left!
Price: $299.00
Fuel Injection Throttle Control Actuator Module
Description: Increase Vehicle Acceleration And Reduce Lag Time Change Your Performance As You Go With The Control Knob Fully Waterproof With Oem Quality Connectors
Burst Throttle Booster
Item #: 49000EO
Condition:
New
Coming Soon
Price: $299.00
Computer Chip Programmer
Description: Tuner/Monitor - Read Vehicle Data On A Full-Color Lcd Display Performance - Preloaded/Dyno-Proven Tunes Boost Power And Torque Diagnostic Tool - Read And Clears DTC Custom Tuning - Load Up To...More Details »
Item #: 7015PEO
Condition:
New
Limited Supply: Only 2 Left!
Price: $399.00
Disc Brake Rotor
Description: Drilled/Slotted Helps Evacuate Gasses/Dust/Heat Directional Curve Vane Designs On Selected Apps Power Alloy Is Descendant Of Patented AeroRotor Black E-Coated Non-Friction - Corrosion...More Details »
Item #: 127.61112L
Condition:
New
Limited Supply: Only 1 Left!
Price: $229.58
Disc Brake Rotor
Description: Drilled/Slotted Helps Evacuate Gasses/Dust/Heat Directional Curve Vane Designs On Selected Apps Power Alloy Is Descendant Of Patented AeroRotor Black E-Coated Non-Friction - Corrosion...More Details »
Item #: 127.61116L
Condition:
New
Limited Supply: Only 1 Left!
Price: $364.66
Disc Brake Rotor
Description: Drilled/Slotted Helps Evacuate Gasses/Dust/Heat Directional Curve Vane Designs On Selected Apps Power Alloy Is Descendant Of Patented AeroRotor Black E-Coated Non-Friction - Corrosion...More Details »
Item #: 127.61112R
Condition:
New
Limited Supply: Only 1 Left!
Price: $229.58
Disc Brake Rotor
Description: Drilled/Slotted Helps Evacuate Gasses/Dust/Heat Directional Curve Vane Designs On Selected Apps Power Alloy Is Descendant Of Patented AeroRotor Black E-Coated Non-Friction - Corrosion...More Details »
Item #: 127.61114R
Condition:
New
Limited Supply: Only 0 Left!
Price: $332.69
Disc Brake Rotor
Description: Drilled/Slotted Helps Evacuate Gasses/Dust/Heat Directional Curve Vane Designs On Selected Apps Power Alloy Is Descendant Of Patented AeroRotor Black E-Coated Non-Friction - Corrosion...More Details »
Item #: 127.61116R
Condition:
New
Limited Supply: Only 1 Left!
Price: $364.66
Computer Chip Programmer
Description: Pre-Loaded Tunes For Perf/Tow/Economy/More Add Additional Vehicle Licenses To Tune Multiple Vehicles Sharp High Definition 5 in. Color Touch-Screen New Manual Entry Options For...More Details »
Item #: 10601
Condition:
New
Coming Soon
Price: $596.95
Computer Chip Programmer
Description: High Definition 2.8 Inch Color Screen Reads And Clears Diagnostic Trouble Codes Internet Updatable With All-New Update Software Via USB 2-Year Powertrain Warranty Increased Memory For Faster...More Details »
Item #: 1845
Condition:
New
Coming Soon
Price: $399.95
Cargo Area Liner
Description: Provides Complete Trunk/Cargo Area Protection Computer Designed To Fit Your Vehicle Raised Lip To Keep Spills/Dirt/Grease Off Interior Made From Proprietary Custom Blended TPO Flexible Under...More Details »
Item #: 401336
Condition:
New
Limited Supply: Only 1 Left!
Price: $149.95
Seat Cover
Description: Universal Seat Protector
Universal Seat Protector; Cocoa; Fits Vehicles w/Bucket Seats
Item #: SPB002CO
Condition:
New
Limited Supply: Only 3 Left!
Price: $161.95
Seat Cover
Description: Universal Seat Protector
Universal Seat Protector; Gray; Fits Vehicles w/Bucket Seats
Item #: SPB002GY
Condition:
New
Price: $161.95
Bumper Insert
Description: Replaces OE insert This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum infusion process. Resin is introduced into the mold as a...More Details »
Item #: AC-FBI15MU350
Condition:
New
Limited Supply: Only 0 Left!
Price: $845.10
Bumper
Description: This fiberglass product is manufactured using Anderson Composite's proprietary vacuum infusion process. The resin is introduced into the mold as a liquid final finish is matte black enamel....More Details »
Item #: AC-FB18FDMU-ST-GF
Condition:
New
Limited Supply: Only 0 Left!
Price: $890.10
Deck Lid Panel
Description: Replaces OE trunk panel This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum infusion process. Resin is introduced into the mold as a...More Details »
Item #: AC-TG15FDMU
Condition:
New
Limited Supply: Only 0 Left!
Price: $494.10
Engine Cover
Description: This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum infusion process. Resin is introduced into the mold as a liquid, producing a high...More Details »
Item #: AC-EC15FDMUEB
Condition:
New
Limited Supply: Only 0 Left!
Price: $449.10
Grille / Fender Vent / Body Badge Kit
Description: Will only fit Anderson Composites fenders AC-FF15FDMU-GR & AC-FF15FDMU-GR-GF This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum...More Details »
Item #: AC-FF15FDMU-GR-01
Condition:
New
Limited Supply: Only 0 Left!
Price: $593.10
Grille / Fender Vent / Body Badge Kit
Description: Replaces OE insert This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum infusion process. Resin is introduced into the mold as a...More Details »
Item #: AC-FGI15MU350
Condition:
New
Limited Supply: Only 0 Left!
Price: $440.10
Spoiler
Description: Show-ready, high luster finish Reuses OEM type fasteners Durable and lightweight This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum...More Details »
Item #: AC-GF20FDMU500
Condition:
New
Limited Supply: Only 0 Left!
Price: $593.10
Rear Seat Delete Panel
Description: This fiberglass product is manufactured using Anderson Composite's proprietary vacuum infusion process. The resin is introduced into the mold as a liquid final finish is matte black enamel....More Details »
Item #: AC-RSD15FDMU
Condition:
New
Limited Supply: Only 0 Left!
Price: $1,979.10
Spoiler
Description: Show-ready, high luster finish Reuses OEM type fasteners Durable and lightweight This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum...More Details »
Item #: AC-RS15FDMU350-OE
Condition:
New
Limited Supply: Only 0 Left!
Price: $1,187.10
Spoiler
Description: Show-ready, high luster finish Reuses OEM type fasteners Durable and lightweight This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum...More Details »
Item #: AC-RS20FDMU500
Condition:
New
Limited Supply: Only 0 Left!
Price: $1,088.10
Spoiler Trim Kit
Description: Show-ready, high luster finish Reuses OEM type fasteners
Carbon fiber front splitter wickers for 2020-2021 Ford Mustang Shelby GT500
All items are non-stock and may take additional time...More Details »
Item #: AC-FBC20FDMU500
Condition:
New
Limited Supply: Only 0 Left!
Price: $1,088.10
Spoiler
Description: This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum infusion process. Resin is introduced into the mold as a liquid, producing a high...More Details »
Item #: AC-RS15FDMU-AT
Condition:
New
Limited Supply: Only 0 Left!
Price: $944.10
Spoiler
Description: Requires normal pre paint prep such as sanding and primer. Occasional surface blemishes may be removed during this sanding and preparation process. This fiberglass product is manufactured using...More Details »
Item #: AC-RS15FDMU-AT-GF
Condition:
New
Limited Supply: Only 0 Left!
Price: $593.10
Spoiler
Description: This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum infusion process. Resin is introduced into the mold as a liquid, producing a high...More Details »
Item #: AC-RS15FDMU-GR
Condition:
New
Limited Supply: Only 0 Left!
Price: $989.10
Spoiler
Description: Requires normal pre paint prep such as sanding and primer. Occasional surface blemishes may be removed during this sanding and preparation process.
Type-GR (GT350R Style) fiberglass rear...More Details »
Item #: AC-RS15FDMU-GR-GF
Condition:
New
Limited Supply: Only 0 Left!
Price: $593.10
Spoiler
Description: This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum infusion process. Resin is introduced into the mold as a liquid, producing a high...More Details »
Item #: AC-RS15FDMU-ST
Condition:
New
Limited Supply: Only 0 Left!
Price: $890.10
Differential Mount
Description: Designed for street performance, drag race, and handling applications, BMR Suspension BK050 Differential Bushings are the perfect wheelhop solution for any S550 Mustang being used for performance...More Details »
Item #: BMRBK050
Condition:
New
Limited Supply: Only 1 Left!
Price: $239.95
Suspension Struts / Shocks / Coil Springs / Camber Plate Kit
Description: Blending aesthetics and performance, BMR has designed the SP086 for the drag race crowd who want to the ultimate in straight-line acceleration.
Lowers your 2015-2023 S550 or 2024 S650 Mustang...More Details »
Item #: SP086R
Condition:
New
Limited Supply: Only 4 Left!
Price: $259.95
Suspension Struts / Shocks / Coil Springs / Camber Plate Kit
Description: BMR has designed the SP083 for the handling crowd who want to use their cars for road course and autocross.
Lowers your 2015-2023 S550 2024 S650 Mustang ;Greatly improves handling ;300 lb/in...More Details »
Item #: SP083R
Condition:
New
Limited Supply: Only 1 Left!
Price: $279.95
Suspension Struts / Shocks / Coil Springs / Camber Plate Kit
Description: These springs will lower your 2015-2024 S550 or 2024 S650, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
Lowers your S550/S650 Mustang for an aggressive...More Details »
Item #: SP080R
Condition:
New
Limited Supply: Only 9 Left!
Price: $219.95
No Image Available
Alignment Camber / Toe Arm
Description: The TR005 allows you to fine-tune the rear toe settings for any form of performance driving.?
Fits all 2015 and newer S550 and 2024 S650 Mustangs;On-car adjustable for easy toe...More Details »
Item #: TR005R
Condition:
New
Limited Supply: Only 2 Left!
Price: $219.95
Suspension Control Arm
Description: BMR Suspension designed the TCA046 to excel in street performance, drag race, and road race applications.
Fits 2015-2023 S550 Mustangs;CNC-machined 6061-T6 billet aluminum;CNC-machined Delrin...More Details »
Item #: TCA046
Condition:
New
Limited Supply: Only 1 Left!
Price: $219.95
Suspension Control Arm Bushing Kit
Description: BMR's Lower Control Arm Spherical Bushings Kit offers huge increases in performance over the stock rubber lower control arm bushings.
Fits 2015-2017 S550 Mustangs ;Designed for street...More Details »
Item #: BK055
Condition:
New
Limited Supply: Only 4 Left!
Price: $209.95
