- Home »
- Catalog
Petty's Garage » Dodge, Charger SXT Plus Leather
Products for:
- Makes: Dodge
- Models: Charger SXT Plus Leather
View Universal items for: Dodge Charger SXT Plus Leather
Browse Products
Manifold Absolute Pressure Sensor Adapter
Description: Genuine OEM Connectors Includes Pins/Seals/TPA Terminal Position Assurance
MAP Sensor Connector; Incl. Connector/Pins/Seals
Item #: 570-240
Condition:
New
Not Available
Engine Cold Air Intake Tube
Description: iNTECH Auxiliary Air Duct
iNTECH Auxiliary Air Duct; Polyethylene
Item #: 223-12-1
Condition:
New
Not Available
Air Intake Kit
Description: Patented Slip-Seal Housing-Filter-Tube Interface 1 Piece Fully Sealed Intake Housing For Max Air Flow/Efficiency Utilizes Fact. Mounting Locations For Simple Secure Installation High...More Details »
Item #: 223-12
Condition:
New
Not Available
Air Intake Kit
Description: Patented Slip-Seal Housing-Filter-Tube Interface 1 Piece Fully Sealed Intake Housing For Max Air Flow/Efficiency Utilizes Fact. Mounting Locations For Simple Secure Installation High...More Details »
Item #: 223-13
Condition:
New
Not Available
Engine Intake Manifold
Description: Silver Finish Creates Stealthy Under-Hood Styling 90Mm Throttle Bore Opening With Mopar Dual Bolt Pattern For Increased Air Flow 100 Percent TIG Welded For Strength And Durability Includes 3/8...More Details »
Item #: 837261
Condition:
New
Not Available
Engine Intake Manifold
Description: Black Finish Creates Stealthy Under-Hood Styling 90Mm Throttle Bore Opening With Mopar Dual Bolt Pattern For Increased Air Flow 100 Percent TIG Welded For Strength And Durability Includes 3/8...More Details »
Item #: 837262
Condition:
New
Not Available
Engine Valve Cover Set
Description: Features Laser Etched Sniper Logo Will Fit 2003-2005 5.7L Hemi If 2006-Later Coils Are Used 2.25 in. Overall Height Offers Additional Valve Train Clearance High Quality 100% TIG Welded...More Details »
Item #: 890015
Condition:
New
Not Available
Engine Valve Cover Set
Description: Features Laser Etched Sniper Logo Will Fit 2003-2005 5.7L Hemi If 2006-Later Coils Are Used 2.25 in. Overall Height Offers Additional Valve Train Clearance High Quality 100% TIG Welded...More Details »
Item #: 890015B
Condition:
New
Not Available
Multi-Purpose Switch Panel Kit
Description: Installs Behind Factory Light For Illumination At Night
Custom Switch Panel; 2015-Up Charger
Item #: 15795
Condition:
New
Limited Supply: Only 0 Left!
Price: $76.43
Catalytic Converter
Description: Stainless Steel Construction Federal Emissions Compliant Designed Meets EPA Requirements
Universal Catalytic Converter-2.50in.
Item #: 51356
Condition:
New
Limited Supply: Only 3 Left!
Price: $202.00
Seat Cover
Description: Durable Water Repellent Finish Stays In Place w/Durable Straps Non-Slip Bottom Semi-Custom Fit Quick And Easy Installation Easily Removable For Cleaning Machine Washable Designed To Fit...More Details »
Item #: DE2011CH
Condition:
New
Limited Supply: Only 6 Left!
Price: $201.95
Seat Cover
Description: Universal Seat Protector
Universal Seat Protector; Cocoa; Fits Vehicles w/Bucket Seats
Item #: SPB002CO
Condition:
New
Limited Supply: Only 3 Left!
Price: $161.95
Seat Cover
Description: Universal Seat Protector
Universal Seat Protector; Gray; Fits Vehicles w/Bucket Seats
Item #: SPB002GY
Condition:
New
Price: $161.95
Engine Cold Air Intake Performance Kit
Description: Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media Dodge Challenger/Charger 11-19 /Chrysler 300 12-14 SRT-8 V8-6.4L HEMI Fits: Dodge Challenger/Charger 11-18/Chrysler 300 12-14 SRT-8 V8-6.4L HEMI
Item #: 51-12172
Condition:
New
Limited Supply: Only 2 Left!
Price: $429.00
Engine Cold Air Intake Performance Kit
Description: Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media Dodge Challenger/Charger/Chrysler 300C 11-19 V8-5.7L HEMI Fits: Dodge Challenger/Charger/Chrysler 300C 11-18 V8-5.7L HEMI
Item #: 51-12162
Condition:
New
Limited Supply: Only 0 Left!
Price: $429.00
Fuel Injection Throttle Body Spacer
Description: Silver Bullet Throttle Body Spacer Kit Dodge Challenger/Charger SRT-8 08-19 V8-5.7L/6.4L HEMI Fits: Dodge Challenger/Charger SRT-8 11-18 V8-5.7L/6.4L HEMI
Item #: 46-32007
Condition:
New
Limited Supply: Only 3 Left!
Price: $139.00
Engine Connecting Rod Bearing Set
Item #: CB1957A(6)
Condition:
New
Limited Supply: Only 0 Left!
Price: $207.14
No Image Available
Description: Engine Connecting Rod Bearing Set
Item #: CB1957A25MM(6)
Condition:
New
Limited Supply: Only 0 Left!
Price: $207.14
Engine Crankshaft Main Bearing Set
Item #: MS2351A
Condition:
New
Limited Supply: Only 0 Left!
Price: $202.81
No Image Available
Engine Crankshaft Main Bearing Set
Item #: MS2351A25MM
Condition:
New
Limited Supply: Only 0 Left!
Price: $202.81
Engine Cylinder Head Gasket
Description: Chrysler 5.7L Gen-3 Hemi .040 " MLX Cylinder Head Gasket, 4.000 " Bore, RHS
Item #: C15315-040
Condition:
New
Limited Supply: Only 1 Left!
Price: $118.16
Engine Cylinder Head Gasket
Description: Chrysler 5.7L Gen-3 Hemi .040 " MLX Cylinder Head Gasket, 4.000 " Bore, LHS
Item #: C15316-040
Condition:
New
Limited Supply: Only 2 Left!
Price: $118.16
Engine Cylinder Head Gasket
Description: Chrysler 6.4L Apache Gen-3 Hemi .040 " MLS Cylinder Head Gasket, 4.120 " Bore, RHS
Item #: C5026-040
Condition:
New
Limited Supply: Only 3 Left!
Price: $96.54
Engine Cylinder Head Gasket
Description: Chrysler 6.4L Apache Gen-3 Hemi .051 " MLS Cylinder Head Gasket, 4.120 " Bore, RHS
Item #: C5026-051
Condition:
New
Limited Supply: Only 0 Left!
Price: $96.54
Engine Cylinder Head Gasket
Description: Chrysler 6.4L Apache Gen-3 Hemi .040 " MLS Cylinder Head Gasket, 4.120 " Bore, LHS
Item #: C5027-040
Condition:
New
Limited Supply: Only 2 Left!
Price: $96.54
Engine Cylinder Head Gasket
Description: Chrysler 6.4L Apache Gen-3 Hemi .051 " MLS Cylinder Head Gasket, 4.120 " Bore, LHS
Item #: C5027-051
Condition:
New
Limited Supply: Only 0 Left!
Price: $96.54
Engine Valve Cover Gasket Set
Description: Chrysler Gen-3 Hemi Valve Cover Kit, Valve Cover and Spark Plug Tubes for 1 Head
Item #: C5193
Condition:
New
Limited Supply: Only 3 Left!
Price: $17.64
Engine Camshaft
Description: No Springs Required (NSR) Stage 1 Grind for 5.7L Gen. IV Hemi. Great mid-range torque w/ excellent power. Perfect for heavier vehicles, has great throttle response.
Stage 1 for '11+ 6.4L HEMI available under 201-302-17
Item #: 201-300-17
Condition:
New
Limited Supply: Only 8 Left!
Price: $576.95
Engine Camshaft
Description: No Springs Required (NSR) Stage 1 Grind for 6.4L Gen. IV Hemi. Awesome across the board power increases in NSR cam for 6.4L ONLY!
Stage 1 for '09+ 5.7L HEMI available under 201-300-17
Item #: 201-302-17
Condition:
New
Limited Supply: Only 0 Left!
Price: $576.95
Engine Camshaft
Description: Best average torque & power of any sub .600" lift Gen. IV HEMI cam tested. Runs great from 2500-6500 RPM.
LST lobe profiles and #26918 valve springs allow 7000 RPM+.
Stage 1 for '09+ 5.7L HEMI...More Details »
Item #: 201-303-17
Condition:
New
Limited Supply: Only 2 Left!
Price: $576.95
Engine Camshaft
Description: Best HP of any stock piston hyd. roller cam by taking full advantage of the Gen IV cyl. head high lift airflow. Runs great from 3000-7000 RPM. LST lobe profiles and #7230 valve springs allow 7500...More Details »
Item #: 201-305-17
Condition:
New
Limited Supply: Only 7 Left!
Price: $576.95
Engine Camshaft
Description: Widest torque curve of any camshaft
tested, with impresive low end gains & outsanding
high end performance. Designed for #26918 spring.
Available in a CK-Kit under CK201-304-17, in an MK-Kit under MK201-304-17
Item #: 201-304-17
Condition:
New
Limited Supply: Only 0 Left!
Price: $576.95
Engine Camshaft
Description: Gains in mid range torque and
drastic power increase at high RPM. Works best w/ ported
heads, stroker cranks and other modifications. Designed for
#7230 spring
Available in a CK-Kit under...More Details »
Item #: 201-306-17
Condition:
New
Limited Supply: Only 1 Left!
Price: $576.95
Engine Valve Lifter Kit
Description: This non-link bar hydraulic roller lifter set features short travel. These lifters' short travel allows for light pre-load and reduced oil volume for the highest revving lifters for GEN III...More Details »
Item #: 15821-16
Condition:
New
Limited Supply: Only 0 Left!
Price: $774.95
Engine Camshaft Kit
Description: Best average torque & power of any sub .600" lift Gen. IV HEMI cam tested. Runs great from 2500-6500 RPM.
LST lobe profiles and #26918 valve springs allow 7000 RPM+.
Available in a CK-Kit under CK201-303-17.
Item #: MK201-303-17
Condition:
New
Limited Supply: Only 0 Left!
Price: $1,751.95
Engine Camshaft
Description: Delivers the awesome Thumpr sound from your VVT HEMI with a simple cam, limiter & tune. Excellent performance in the mid to upper RPM with only small losses below 2500 RPM. Phaser limiter or...More Details »
Item #: 201-700-17
Condition:
New
Limited Supply: Only 2 Left!
Price: $576.95
Engine Camshaft
Description: Good improvements over the factory Apache camshaft.
Item #: 201-424-17
Condition:
New
Limited Supply: Only 1 Left!
Price: $576.95
Engine Camshaft
Description: Best all around performance grind for 6.4L applications.
Item #: 201-426-17
Condition:
New
Limited Supply: Only 1 Left!
Price: $576.95
Engine Camshaft
Description: Requires either added displacement or high RPM modifications in street/strip applications.
Item #: 201-428-17
Condition:
New
Limited Supply: Only 8 Left!
Price: $576.95
Coil Spring Set
Description: Lowers 1/4-mile ET's. Maximum Traction. Consistent Launches.
Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
Item #: E32-27-004-02-22
Condition:
New
Limited Supply: Only 1 Left!
Price: $355.00
Coil Spring Lowering Kit
Description: Extreme Performance Meets Extreme Style. Race-Car Like Handling. Lower Center of Gravity. Stop Quicker, Corner Faster and get Better MPG!
Tested with factory dampers. More Details »
Item #: 4.10528
Condition:
New
Limited Supply: Only 2 Left!
Price: $350.00
Wheel Cap
Description: Easy Bolt On Installation Clear Powder Coat for UV Protection CNC Machined 6061 Aluminum New Modern Look
Hurst Wheel Center Cap; Black Anodized; For Use w/Factory Aluminum Wheels;...More Details »
Item #: 6360006
Condition:
New
Price: $200.93
Automatic Transmission Shift Lever Knob
Description: 6061 Billet Aluminum Material Trigger Operated Lockout Function Modern Pistol Grip Styling Easy Bolt On Installation 1 Year Limited Warranty
Pistol Grip Automatic Shifter Handle; Black...More Details »
Item #: 5380437
Condition:
New
Limited Supply: Only 5 Left!
Price: $306.95
Suspension Kit
Description: Improves Handling Performance Perfect Muscle Car Stance Daily Driver/Street Friendly Improves Aerodynamic Efficiency Limited Lifetime Warranty
Spring Kit; Stage One; Front and Rear; 1.25...More Details »
Item #: 6130012
Condition:
New
Price: $566.75
Engine Cold Air Intake
Description: Dyno Proven gains of up to 19 hp and 21 lb-ft. of torque Injen Clear-View badge for simple air filter inspection Designed to work with the stock calibration Aggressive intake growl under...More Details »
Item #: EVO5100
Condition:
New
Limited Supply: Only 0 Left!
Price: $369.95
Engine Cold Air Intake
Description: Dyno Proven gains of up to 19 hp and 21 lb-ft. of torque Injen Clear-View badge for simple air filter inspection Designed to work with the stock calibration Aggressive intake growl under...More Details »
Item #: EVO5100C
Condition:
New
Limited Supply: Only 0 Left!
Price: $369.95
Engine Cold Air Intake
Description: Dyno Proven gains of up to 13 hp and 13 lb-ft. of torque Injen Clear-View badge for simple air filter inspection Designed to work with the stock calibration Aggressive intake growl under...More Details »
Item #: EVO5101
Condition:
New
Limited Supply: Only 0 Left!
Price: $407.95
Engine Cold Air Intake
Description: Dyno Proven gains of up to 13 hp and 13 lb-ft. of torque Injen Clear-View badge for simple air filter inspection Designed to work with the stock calibration Aggressive intake growl under...More Details »
Item #: EVO5101C
Condition:
New
Limited Supply: Only 0 Left!
Price: $407.95
Engine Cold Air Intake
Description: Dyno Proven gains of up to 14 hp and 18 lb-ft. of torque Provides power gains while maintaining A/F ratios with no additional tuning T6-6061 aluminum intake tubing Fully serviceable Injen...More Details »
Item #: PF5072P
Condition:
New
Limited Supply: Only 0 Left!
Price: $398.95
Engine Cold Air Intake
Description: Dyno Proven gains of up to 14 hp and 18 lb-ft. of torque Provides power gains while maintaining A/F ratios with no additional tuning T6-6061 aluminum intake tubing Fully serviceable Injen...More Details »
Item #: PF5072WB
Condition:
New
Limited Supply: Only 0 Left!
Price: $398.95
Engine Cold Air Intake
Description: Dyno Proven gains of up to 8 hp and 8 lb-ft. of torque Provides power gains while maintaining A/F ratios with no additional tuning T6-6061 aluminum intake tubing Fully serviceable Injen...More Details »
Item #: PF5063P
Condition:
New
Limited Supply: Only 0 Left!
Price: $326.95
Engine Cold Air Intake
Description: Dyno Proven gains of up to 8 hp and 8 lb-ft. of torque Provides power gains while maintaining A/F ratios with no additional tuning T6-6061 aluminum intake tubing Fully serviceable Injen...More Details »
Item #: PF5063WB
Condition:
New
Limited Supply: Only 0 Left!
Price: $326.95
Engine Cold Air Intake
Description: Dyno Proven gains of up to 6 hp and 9 lb-ft. of torque Provides power gains while maintaining A/F ratios with no additional tuning T6-6061 aluminum intake tubing Fully serviceable Injen...More Details »
Item #: PF5064WB
Condition:
New
Limited Supply: Only 0 Left!
Price: $321.95
Description: JBA Cat4Ward® Header 09-20 Chrylser 5.7L HEMI 1 3/4" Primary Raw 409 1964S-1
Item #: 1964S-1
Condition:
New
Limited Supply: Only 0 Left!
Price: $584.96
Description: JBA Cat4Ward® Header 09-20 Chrylser 5.7L HEMI 1 3/4" Primary Silver Ctd 1964S-1JS
Fits: 2009-2020 Chllngr/Chrgr/300C 5.7L
Item #: 1964S-1JS
Condition:
New
Limited Supply: Only 1 Left!
Price: $785.95
Description: JBA Cat4Ward® Header 09-20 Chrylser 5.7L HEMI 1 3/4" Primary Ti Ctd 1964S-1JT Fits: 2009-2020 Chllngr/Chrgr/300C 5.7L
Item #: 1964S-1JT
Condition:
New
Limited Supply: Only 0 Left!
Price: $701.96
Description: JBA Cat4Ward® Header 15-20 Chrysler 6.2/6.4L HEMI 1 7/8" Primary Raw 409 1968S
Item #: 1968S
Condition:
New
Limited Supply: Only 0 Left!
Price: $638.95
Description: JBA Cat4Ward® Header 15-20 Chrysler 6.2/6.4L HEMI 1 7/8" Primary Silver Ctd 1968SJS
Item #: 1968SJS
Condition:
New
Limited Supply: Only 0 Left!
Price: $683.96
Exhaust System Kit
Description: JBA Cat Back Exhaust 15-20 Dodge Charger SRT8 & Hellcat 6.2/6.4L 409SS Dual Rear
Item #: 40-1669
Condition:
New
Limited Supply: Only 0 Left!
Price: $845.96
Description: FIRST RUN-LIMITED QUANTITY
Item #: 100-665
Condition:
New
Price: $2,295.00
