- Home »
- Catalog
Petty's Garage » 2017, Dodge, 6.2
Products for:
- Years: 2017
- Makes: Dodge
- Liters: 6.2
View Universal items for: 2017 Dodge 6.2
Browse Products
Exhaust System Kit
Description: Mandrel Bent Tubing Aggressive Exterior Exhaust Tone Incl. Hangers and Hardware For Easy Installation Dyno Tuned for Maximum Performance Premium Flowmaster Quality Patented Delta Flow...More Details »
Item #: 817739
Condition:
New
Limited Supply: Only 1 Left!
Price: $1,117.95
Air Intake Kit
Description: High Quality Components With Custom Look No Cutting or Drilling For Easy Installation Serviceable Lifetime High-Flow Filter No Tuning Required Limited Lifetime Warranty Made in the USA...More Details »
Item #: 615105
Condition:
New
Limited Supply: Only 8 Left!
Price: $387.95
Exhaust System Kit
Description: Mandrel Bent 16ga 409 Stainless Tubing Limited Lifetime Warranty Aggressive And Powerful Exterior Exhaust Tone Incl. Hangers and Hardware For Easy Installation Cat Back System Dual Out Rear...More Details »
Item #: 817740
Condition:
New
Limited Supply: Only 2 Left!
Price: $1,237.95
Catalytic Converter
Description: 6.2L/6375 lbs. EPA Heavy Metal Loaded Catalyst Stainless Steel Construction Federal Emissions Compliant Designed Meets EPA Requirements
Universal Catalytic Converter-2.50in. More Details »
Item #: 99356HM
Condition:
New
Limited Supply: Only 1 Left!
Price: $188.00
Fuel Pump Module Assembly
Description: Two 255 lph Pump Modules Re-Uses Factory Fuel Level Sender HydraMat/Pump/Regulator On Each Side Of Saddle Tank Removes Parasitic Factory Jet Pump Secondary Transfer System Billet Aluminum...More Details »
Item #: 12-154
Condition:
New
Not Available
Price: $1,418.95
Fuel Pump Module Assembly
Description: Two 525 lph Pump Modules Re-Uses Factory Fuel Level Sender Removes Parasitic Factory Jet Pump Secondary Transfer System HydraMat/Pump/Regulator On Each Side Of Saddle Tank Can Be Configured...More Details »
Item #: 12-176
Condition:
New
Not Available
Price: $1,536.95
Engine Camshaft Position Sensor Connector
Description: Genuine OEM Connectors Single Pack Connector Kit
Camshaft Position Sensor Connector; Apex 1.2; 3 Cavity; Female; Black Housing; Incl. Connector/Pins/Seals
Item #: 570-234
Condition:
New
Engine Coolant Temperature Sensor Connector
Description: Genuine OEM Connectors
Coolant Temperature Sensor Connector; 1.5 mm. YEC; 2 Pin; Incl. Connector/Pins/Seals
Item #: 570-233
Condition:
New
Idle Air Control Valve Connector
Description: Genuine OEM Connectors
Crankshaft Position Sensor Connector; APEX 2.8; 3 Cavity; Female; Black Housing; Incl. Connector/Pins/Seals
Item #: 570-235
Condition:
New
Fuel Injector Rail
Description: Direct Fit For Naturally Aspirated Gen Iii Hemi Engines Machined Billet Extrusions w/Laser Etched Holley EFI Logo Clip Feature Retained So Factory Injector Clips Can Be Re-used Front And Back...More Details »
Item #: 534-284
Condition:
New
Not Available
Price: $185.95
Engine Intake Manifold
Description: Cast Aluminum Construction w/Large Intake Ports Designed To Perform Well For Engine Configurations Works w/Gen III Hemi Injectors O-Ring Seal To Head Billet Oil Fill Cap Positive Cranckcase...More Details »
Item #: 300-653
Condition:
New
Not Available
Price: $709.95
Engine Intake Manifold
Description: Cast Aluminum Construction w/Large Intake Ports Designed To Perform Well For Engine Configurations Works w/Gen III Hemi Injectors O-Ring Seal To Head Billet Oil Fill Cap Positive Cranckcase...More Details »
Item #: 300-650
Condition:
New
Not Available
Price: $992.95
Engine Intake Manifold
Description: Plenum Top Gasket Type - 3/32 in. Round O-ring Cord Manifold Is Designed For A 8.2 In. SBF Deck Height
Holley EFI Hi-Ram Intake Manifold; W/95mm LS Throttle Body; Gen III Hemi; Aluminum;...More Details »
Item #: 300-650BK
Condition:
New
Not Available
Price: $1,063.95
Engine Intake Manifold
Description: Cast Aluminum Construction w/Large Intake Ports Designed To Perform Well For Engine Configurations Works w/Gen III Hemi Injectors O-Ring Seal To Head Billet Oil Fill Cap Positive Cranckcase...More Details »
Item #: 300-651
Condition:
New
Not Available
Price: $992.95
Engine Intake Manifold
Description: Plenum Top Gasket Type - 3/32 in. Round O-ring Cord Manifold Is Designed For A 8.2 In. SBF Deck Height
Holley EFI Hi-Ram Intake Manifold; W/105mm LS Throttle Body; Gen III Hemi; Aluminum;...More Details »
Item #: 300-651BK
Condition:
New
Not Available
Price: $1,063.95
Engine Intake Manifold
Description: Plenum Top Gasket Type - 3/32 in. Round O-ring Cord Manifold Is Designed For A 8.2 In. SBF Deck Height
Holley EFI Hi-Ram Intake Manifold; Lower; Gen III Hemi Base; Black Finish; Aluminum;...More Details »
Item #: 300-653BK
Condition:
New
Not Available
Price: $745.95
Air Charge Temperature Sensor Connector
Description: Genuine OEM Connectors
Intake Air Temperature Sensor Connector; Molex; 2 Cavity; Female; Incl. Connector/Pins/Seals
Item #: 570-227
Condition:
New
Ignition Knock (Detonation) Sensor Connector
Description: Genuine OEM Connectors
Knock Sensor Connector; DMS Connector Housing; 3 Pin; Incl. Connector/Pins/Seals
Item #: 570-230
Condition:
New
Not Available
Price: $10.23
Manifold Absolute Pressure Sensor Adapter
Description: Genuine OEM Connectors Includes Pins/Seals/TPA Terminal Position Assurance
MAP Sensor Connector; Incl. Connector/Pins/Seals
Item #: 570-240
Condition:
New
Engine Cold Air Intake Tube
Description: iNTECH Auxiliary Air Duct
iNTECH Auxiliary Air Duct; Polyethylene
Item #: 223-12-1
Condition:
New
Not Available
Price: $75.19
Air Intake Kit
Description: Patented Slip-Seal Housing-Filter-Tube Interface 1 Piece Fully Sealed Intake Housing For Max Air Flow/Efficiency Utilizes Fact. Mounting Locations For Simple Secure Installation High...More Details »
Item #: 223-12
Condition:
New
Not Available
Price: $406.95
Air Intake Kit
Description: Patented Slip-Seal Housing-Filter-Tube Interface 1 Piece Fully Sealed Intake Housing For Max Air Flow/Efficiency Utilizes Fact. Mounting Locations For Simple Secure Installation High...More Details »
Item #: 223-13
Condition:
New
Not Available
Price: $406.95
Engine Intake Manifold
Description: Silver Finish Creates Stealthy Under-Hood Styling 90Mm Throttle Bore Opening With Mopar Dual Bolt Pattern For Increased Air Flow 100 Percent TIG Welded For Strength And Durability Includes 3/8...More Details »
Item #: 837261
Condition:
New
Not Available
Price: $1,063.95
Engine Intake Manifold
Description: Black Finish Creates Stealthy Under-Hood Styling 90Mm Throttle Bore Opening With Mopar Dual Bolt Pattern For Increased Air Flow 100 Percent TIG Welded For Strength And Durability Includes 3/8...More Details »
Item #: 837262
Condition:
New
Not Available
Price: $1,063.95
Engine Valve Cover Set
Description: Features Laser Etched Sniper Logo Will Fit 2003-2005 5.7L Hemi If 2006-Later Coils Are Used 2.25 in. Overall Height Offers Additional Valve Train Clearance High Quality 100% TIG Welded...More Details »
Item #: 890015
Condition:
New
Not Available
Price: $488.95
Engine Valve Cover Set
Description: Features Laser Etched Sniper Logo Will Fit 2003-2005 5.7L Hemi If 2006-Later Coils Are Used 2.25 in. Overall Height Offers Additional Valve Train Clearance High Quality 100% TIG Welded...More Details »
Item #: 890015B
Condition:
New
Not Available
Price: $513.95
Multi-Purpose Switch Panel Kit
Description: Installs Behind Factory Light For Illumination At Night
Custom Switch Panel; 2015-Up Charger
Item #: 15795
Condition:
New
Limited Supply: Only 0 Left!
Price: $76.43
Catalytic Converter
Description: Stainless Steel Construction Federal Emissions Compliant Designed Meets EPA Requirements
Universal Catalytic Converter-2.50in.
Item #: 51356
Condition:
New
Limited Supply: Only 3 Left!
Price: $202.00
Exhaust System Kit
Description: Dyno Tested And Proven To Make Power Performance Gains In Horsepower And Torque Great Sound Has A Smooth Deep Tone Easy To Install 100 Percent All Stainless Steel Mandrel Bent/All...More Details »
Item #: 19206
Condition:
New
Limited Supply: Only 3 Left!
Price: $847.00
Floor Mat Set
Description: Made Of Natural Heavy Duty Rubber Deeply Sculpted Channels Designed To Trap Water/Road Salt/Mud And Sand Made Of 16 lbs. Of Pliable Natural Rubber Will Not Curl/Crack/Harden In Sub-Zero...More Details »
Item #: 443862
Condition:
New
Limited Supply: Only 1 Left!
Price: $84.95
Seat Cover
Description: Durable Water Repellent Finish Stays In Place w/Durable Straps Non-Slip Bottom Semi-Custom Fit Quick And Easy Installation Easily Removable For Cleaning Machine Washable Designed To Fit...More Details »
Item #: DE2011CH
Condition:
New
Limited Supply: Only 6 Left!
Price: $201.95
Seat Cover
Description: Universal Seat Protector
Universal Seat Protector; Cocoa; Fits Vehicles w/Bucket Seats
Item #: SPB002CO
Condition:
New
Limited Supply: Only 3 Left!
Price: $161.95
Seat Cover
Description: Universal Seat Protector
Universal Seat Protector; Gray; Fits Vehicles w/Bucket Seats
Item #: SPB002GY
Condition:
New
Price: $161.95
Engine Cold Air Intake Performance Kit
Description: Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media Dodge Challenger/Charger 11-19 /Chrysler 300 12-14 SRT-8 V8-6.4L HEMI Fits: Dodge Challenger/Charger 11-18/Chrysler 300 12-14 SRT-8 V8-6.4L HEMI
Item #: 51-12172
Condition:
New
Limited Supply: Only 2 Left!
Price: $429.00
Engine Cold Air Intake Performance Kit
Description: Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media Dodge Challenger/Charger/Chrysler 300C 11-19 V8-5.7L HEMI Fits: Dodge Challenger/Charger/Chrysler 300C 11-18 V8-5.7L HEMI
Item #: 51-12162
Condition:
New
Limited Supply: Only 0 Left!
Price: $429.00
Fuel Injection Throttle Body Spacer
Description: Silver Bullet Throttle Body Spacer Kit Dodge Challenger/Charger SRT-8 08-19 V8-5.7L/6.4L HEMI Fits: Dodge Challenger/Charger SRT-8 11-18 V8-5.7L/6.4L HEMI
Item #: 46-32007
Condition:
New
Limited Supply: Only 3 Left!
Price: $139.00
Spoiler
Description: With provision for optional back up camera This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum infusion process. Resin is introduced...More Details »
Item #: AC-RS15DGCHHC-OE
Condition:
New
Limited Supply: Only 0 Left!
Price: $755.10
Spoiler
Description: Show-ready, high luster finish Reuses OEM type fasteners
Type-SA carbon fiber rear spoiler for 2015-2020 Dodge Challenger
All items are non-stock and may take additional time to...More Details »
Item #: AC-RS18DGCHHC-SA
Condition:
New
Limited Supply: Only 0 Left!
Price: $890.10
Disc Brake Upgrade Kit
Description: Front Brake Components Extreme+ Brake System Front Ext+ FB no hub Ext+ FB no hub 6S Black SDZ
Ships in 1 Box
Item #: 4141043B
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Front Brake Components Extreme+ Brake System Front Ext+ FB no hub Ext+ FB no hub 6S Black SDZ
Ships in 1 Box
Item #: 4141153B
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Front Brake Components Extreme+ Brake System Front Ext+ FR no hub Ext+ FR no hub 6S Red SDZ
Ships in 1 Box
Item #: 4141043R
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Front Brake Components Extreme+ Brake System Front Ext+ FR no hub Ext+ FR no hub 6S Red SDZ
Ships in 1 Box
Item #: 4141153R
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Front Brake Components Extreme+ Brake System Front Ext+ FS no hub Ext+ FS no hub 6S Silver SDZ
Ships in 1 Box
Item #: 4141043S
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Front Brake Components Extreme+ Brake System Front Ext+ FS no hub Ext+ FS no hub 6S Silver SDZ
Ships in 1 Box
Item #: 4141153S
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Rear Brake Components Extreme+ Brake System Rear Ext+ RB no park Ext+ RB no park 6S Black SDZ
Ships in 1 Box
Item #: 4142018B
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Rear Brake Components Extreme+ Brake System Rear Ext+ RB no park Ext+ RB no park 6S Black SDZ
Ships in 2 Boxes
Item #: 4142036B
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Rear Brake Components Extreme+ Brake System Rear Ext+ RR no park Ext+ RR no park 6S Red SDZ
Ships in 1 Box
Item #: 4142018R
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Rear Brake Components Extreme+ Brake System Rear Ext+ RR no park Ext+ RR no park 6S Red SDZ
Ships in 2 Boxes
Item #: 4142036R
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Rear Brake Components Extreme+ Brake System Rear Ext+ RS no park Ext+ RS no park 6S Silver SDZ
Ships in 1 Box
Item #: 4142018S
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Rear Brake Components Extreme+ Brake System Rear Ext+ RS no park Ext+ RS no park 6S Silver SDZ
Ships in 2 Boxes
Item #: 4142036S
Condition:
New
Price: $3,995.00
Disc Brake Upgrade Kit
Description: Front Brake Components Pro+ Brake System Front Pro+ FB no hub Pro+ FB no hub 6P Black SDZ
Ships in 1 Box
Item #: 4141152B
Condition:
New
Price: $2,395.00
Disc Brake Upgrade Kit
Description: Front Brake Components Pro+ Brake System Front Pro+ FR no hub Pro+ FR no hub 6P Red SDZ
Ships in 1 Box
Item #: 4141152R
Condition:
New
Price: $2,395.00
Disc Brake Upgrade Kit
Description: Front Brake Components Pro+ Brake System Front Pro+ FS no hub Pro+ FS no hub 6P Silver SDZ
Ships in 1 Box
Item #: 4141152S
Condition:
New
Price: $2,395.00
Disc Brake Upgrade Kit
Description: Rear Brake Components Pro+ Brake System Rear Pro+ RB no park Pro+ RB no park 6P Black SDZ
Ships in 2 Boxes
Item #: 4142033B
Condition:
New
Price: $2,395.00
Disc Brake Upgrade Kit
Description: Rear Brake Components Pro+ Brake System Rear Pro+ RR no park Pro+ RR no park 6P Red SDZ
Ships in 2 Boxes
Item #: 4142033R
Condition:
New
Price: $2,395.00
Disc Brake Upgrade Kit
Description: Rear Brake Components Pro+ Brake System Rear Pro+ RS no park Pro+ RS no park 6P Silver SDZ
Ships in 2 Boxes
Item #: 4142033S
Condition:
New
Price: $2,395.00
No Image Available
Drive Shaft Center Support
Description: BMR Suspension designed the DSL110 Driveshaft Safety Loop to contain a driveshaft, keeping it from ripping through the floor or digging into the track in event of a failure.
Fits 2015 and newer...More Details »
Item #: DSL110R
Condition:
New
Limited Supply: Only 0 Left!
Price: $129.95
No Image Available
Suspension Struts / Shocks / Coil Springs / Camber Plate Kit
Description: These springs will lower your Challenger, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
Lowers your V8-equipped 2008 and newer Challenger by...More Details »
Item #: SP110R
Condition:
New
Limited Supply: Only 1 Left!
Price: $299.95
Engine Connecting Rod Bearing Set
Item #: CB1957A(6)
Condition:
New
Limited Supply: Only 0 Left!
Price: $207.14
No Image Available
Description: Engine Connecting Rod Bearing Set
Item #: CB1957A25MM(6)
Condition:
New
Limited Supply: Only 0 Left!
Price: $207.14
