- Home »
- Catalog
Petty's Garage » 2018, Challenger T/A
Products for:
- Years: 2018
- Models: Challenger T/A
View Universal items for: 2018 Challenger T/A
Browse Products
Engine Coolant Temperature Sensor Connector
Description: Genuine OEM Connectors
Coolant Temperature Sensor Connector; 1.5 mm. YEC; 2 Pin; Incl. Connector/Pins/Seals
Item #: 570-233
Condition:
New
Idle Air Control Valve Connector
Description: Genuine OEM Connectors
Crankshaft Position Sensor Connector; APEX 2.8; 3 Cavity; Female; Black Housing; Incl. Connector/Pins/Seals
Item #: 570-235
Condition:
New
Fuel Injector Rail
Description: Direct Fit For Naturally Aspirated Gen Iii Hemi Engines Machined Billet Extrusions w/Laser Etched Holley EFI Logo Clip Feature Retained So Factory Injector Clips Can Be Re-used Front And Back...More Details »
Item #: 534-284
Condition:
New
Not Available
Price: $185.95
Engine Intake Manifold
Description: Cast Aluminum Construction w/Large Intake Ports Designed To Perform Well For Engine Configurations Works w/Gen III Hemi Injectors O-Ring Seal To Head Billet Oil Fill Cap Positive Cranckcase...More Details »
Item #: 300-653
Condition:
New
Not Available
Price: $709.95
Engine Intake Manifold
Description: Cast Aluminum Construction w/Large Intake Ports Designed To Perform Well For Engine Configurations Works w/Gen III Hemi Injectors O-Ring Seal To Head Billet Oil Fill Cap Positive Cranckcase...More Details »
Item #: 300-650
Condition:
New
Not Available
Price: $992.95
Engine Intake Manifold
Description: Plenum Top Gasket Type - 3/32 in. Round O-ring Cord Manifold Is Designed For A 8.2 In. SBF Deck Height
Holley EFI Hi-Ram Intake Manifold; W/95mm LS Throttle Body; Gen III Hemi; Aluminum;...More Details »
Item #: 300-650BK
Condition:
New
Not Available
Price: $1,063.95
Engine Intake Manifold
Description: Cast Aluminum Construction w/Large Intake Ports Designed To Perform Well For Engine Configurations Works w/Gen III Hemi Injectors O-Ring Seal To Head Billet Oil Fill Cap Positive Cranckcase...More Details »
Item #: 300-651
Condition:
New
Not Available
Price: $992.95
Engine Intake Manifold
Description: Plenum Top Gasket Type - 3/32 in. Round O-ring Cord Manifold Is Designed For A 8.2 In. SBF Deck Height
Holley EFI Hi-Ram Intake Manifold; W/105mm LS Throttle Body; Gen III Hemi; Aluminum;...More Details »
Item #: 300-651BK
Condition:
New
Not Available
Price: $1,063.95
Engine Intake Manifold
Description: Plenum Top Gasket Type - 3/32 in. Round O-ring Cord Manifold Is Designed For A 8.2 In. SBF Deck Height
Holley EFI Hi-Ram Intake Manifold; Lower; Gen III Hemi Base; Black Finish; Aluminum;...More Details »
Item #: 300-653BK
Condition:
New
Not Available
Price: $745.95
Air Charge Temperature Sensor Connector
Description: Genuine OEM Connectors
Intake Air Temperature Sensor Connector; Molex; 2 Cavity; Female; Incl. Connector/Pins/Seals
Item #: 570-227
Condition:
New
Ignition Knock (Detonation) Sensor Connector
Description: Genuine OEM Connectors
Knock Sensor Connector; DMS Connector Housing; 3 Pin; Incl. Connector/Pins/Seals
Item #: 570-230
Condition:
New
Not Available
Price: $10.23
Manifold Absolute Pressure Sensor Adapter
Description: Genuine OEM Connectors Includes Pins/Seals/TPA Terminal Position Assurance
MAP Sensor Connector; Incl. Connector/Pins/Seals
Item #: 570-240
Condition:
New
Engine Cold Air Intake Tube
Description: iNTECH Auxiliary Air Duct
iNTECH Auxiliary Air Duct; Polyethylene
Item #: 223-12-1
Condition:
New
Not Available
Price: $75.19
Air Intake Kit
Description: Patented Slip-Seal Housing-Filter-Tube Interface 1 Piece Fully Sealed Intake Housing For Max Air Flow/Efficiency Utilizes Fact. Mounting Locations For Simple Secure Installation High...More Details »
Item #: 223-12
Condition:
New
Not Available
Price: $406.95
Air Intake Kit
Description: Patented Slip-Seal Housing-Filter-Tube Interface 1 Piece Fully Sealed Intake Housing For Max Air Flow/Efficiency Utilizes Fact. Mounting Locations For Simple Secure Installation High...More Details »
Item #: 223-13
Condition:
New
Not Available
Price: $406.95
Engine Intake Manifold
Description: Silver Finish Creates Stealthy Under-Hood Styling 90Mm Throttle Bore Opening With Mopar Dual Bolt Pattern For Increased Air Flow 100 Percent TIG Welded For Strength And Durability Includes 3/8...More Details »
Item #: 837261
Condition:
New
Not Available
Price: $1,063.95
Engine Intake Manifold
Description: Black Finish Creates Stealthy Under-Hood Styling 90Mm Throttle Bore Opening With Mopar Dual Bolt Pattern For Increased Air Flow 100 Percent TIG Welded For Strength And Durability Includes 3/8...More Details »
Item #: 837262
Condition:
New
Not Available
Price: $1,063.95
Engine Valve Cover Set
Description: Features Laser Etched Sniper Logo Will Fit 2003-2005 5.7L Hemi If 2006-Later Coils Are Used 2.25 in. Overall Height Offers Additional Valve Train Clearance High Quality 100% TIG Welded...More Details »
Item #: 890015
Condition:
New
Not Available
Price: $488.95
Engine Valve Cover Set
Description: Features Laser Etched Sniper Logo Will Fit 2003-2005 5.7L Hemi If 2006-Later Coils Are Used 2.25 in. Overall Height Offers Additional Valve Train Clearance High Quality 100% TIG Welded...More Details »
Item #: 890015B
Condition:
New
Not Available
Price: $513.95
Catalytic Converter
Description: Stainless Steel Construction Federal Emissions Compliant Designed Meets EPA Requirements
Universal Catalytic Converter-2.50in.
Item #: 51356
Condition:
New
Limited Supply: Only 3 Left!
Price: $202.00
Floor Mat Set
Description: Made Of Natural Heavy Duty Rubber Deeply Sculpted Channels Designed To Trap Water/Road Salt/Mud And Sand Made Of 16 lbs. Of Pliable Natural Rubber Will Not Curl/Crack/Harden In Sub-Zero...More Details »
Item #: 443862
Condition:
New
Limited Supply: Only 1 Left!
Price: $84.95
Seat Cover
Description: Durable Water Repellent Finish Stays In Place w/Durable Straps Non-Slip Bottom Semi-Custom Fit Quick And Easy Installation Easily Removable For Cleaning Machine Washable Designed To Fit...More Details »
Item #: DE2011CH
Condition:
New
Limited Supply: Only 6 Left!
Price: $201.95
Seat Cover
Description: Universal Seat Protector
Universal Seat Protector; Cocoa; Fits Vehicles w/Bucket Seats
Item #: SPB002CO
Condition:
New
Limited Supply: Only 3 Left!
Price: $161.95
Seat Cover
Description: Universal Seat Protector
Universal Seat Protector; Gray; Fits Vehicles w/Bucket Seats
Item #: SPB002GY
Condition:
New
Price: $161.95
No Image Available
Engine Cold Air Intake
Description: Magnum FORCE Stage-2 Cold Air Intake System w/ Pro 5R Filter Dodge Challenger SRT Hellcat 19-23 V8-6.2L (sc) Fits: Dodge Challenger SRT Hellcat 19-23 V8-6.2L (sc)
Item #: 54-13076R
Condition:
New
Limited Supply: Only 1 Left!
Price: $499.00
No Image Available
Engine Cold Air Intake
Description: Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Filter Dodge Challenger SRT Hellcat 19-23 V8-6.2L (sc) Fits: Dodge Challenger SRT Hellcat 19-23 V8-6.2L (sc)
Item #: 54-13076D
Condition:
New
Limited Supply: Only 2 Left!
Price: $499.00
Engine Cold Air Intake Performance Kit
Description: Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media Dodge Challenger/Charger 11-19 /Chrysler 300 12-14 SRT-8 V8-6.4L HEMI Fits: Dodge Challenger/Charger 11-18/Chrysler 300 12-14 SRT-8 V8-6.4L HEMI
Item #: 51-12172
Condition:
New
Limited Supply: Only 2 Left!
Price: $429.00
Engine Cold Air Intake Performance Kit
Description: Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media Dodge Challenger/Charger/Chrysler 300C 11-19 V8-5.7L HEMI Fits: Dodge Challenger/Charger/Chrysler 300C 11-18 V8-5.7L HEMI
Item #: 51-12162
Condition:
New
Limited Supply: Only 0 Left!
Price: $429.00
Fuel Injection Throttle Body Spacer
Description: Silver Bullet Throttle Body Spacer Kit Dodge Challenger/Charger SRT-8 08-19 V8-5.7L/6.4L HEMI Fits: Dodge Challenger/Charger SRT-8 11-18 V8-5.7L/6.4L HEMI
Item #: 46-32007
Condition:
New
Limited Supply: Only 3 Left!
Price: $139.00
Spoiler
Description: With provision for optional back up camera This product is manufactured using 3K, 2X2 Twill Weave Carbon Fiber and Anderson Composite's proprietary vacuum infusion process. Resin is introduced...More Details »
Item #: AC-RS15DGCHHC-OE
Condition:
New
Limited Supply: Only 0 Left!
Price: $755.10
Spoiler
Description: Show-ready, high luster finish Reuses OEM type fasteners
Type-SA carbon fiber rear spoiler for 2015-2020 Dodge Challenger
All items are non-stock and may take additional time to...More Details »
Item #: AC-RS18DGCHHC-SA
Condition:
New
Limited Supply: Only 0 Left!
Price: $890.10
No Image Available
Drive Shaft Center Support
Description: BMR Suspension designed the DSL110 Driveshaft Safety Loop to contain a driveshaft, keeping it from ripping through the floor or digging into the track in event of a failure.
Fits 2015 and newer...More Details »
Item #: DSL110R
Condition:
New
Limited Supply: Only 0 Left!
Price: $129.95
No Image Available
Suspension Struts / Shocks / Coil Springs / Camber Plate Kit
Description: These springs will lower your Challenger, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
Lowers your V8-equipped 2008 and newer Challenger by...More Details »
Item #: SP110R
Condition:
New
Limited Supply: Only 1 Left!
Price: $299.95
Engine Connecting Rod Bearing Set
Item #: CB1957A(6)
Condition:
New
Limited Supply: Only 0 Left!
Price: $207.14
No Image Available
Description: Engine Connecting Rod Bearing Set
Item #: CB1957A25MM(6)
Condition:
New
Limited Supply: Only 0 Left!
Price: $207.14
No Image Available
Engine Crankshaft Main Bearing Set
Item #: MS2351A25MM
Condition:
New
Limited Supply: Only 0 Left!
Price: $202.81
Engine Crankshaft Main Bearing Set
Item #: MS2351A
Condition:
New
Limited Supply: Only 0 Left!
Price: $202.81
Engine Cylinder Head Gasket
Description: Chrysler 5.7L Gen-3 Hemi .040 " MLX Cylinder Head Gasket, 4.000 " Bore, RHS
Item #: C15315-040
Condition:
New
Limited Supply: Only 1 Left!
Price: $118.16
Engine Cylinder Head Gasket
Description: Chrysler 5.7L Gen-3 Hemi .040 " MLX Cylinder Head Gasket, 4.000 " Bore, LHS
Item #: C15316-040
Condition:
New
Limited Supply: Only 2 Left!
Price: $118.16
Engine Cylinder Head Gasket
Description: Chrysler 6.4L Apache Gen-3 Hemi .040 " MLS Cylinder Head Gasket, 4.120 " Bore, RHS
Item #: C5026-040
Condition:
New
Limited Supply: Only 3 Left!
Price: $96.54
Engine Cylinder Head Gasket
Description: Chrysler 6.4L Apache Gen-3 Hemi .051 " MLS Cylinder Head Gasket, 4.120 " Bore, RHS
Item #: C5026-051
Condition:
New
Limited Supply: Only 0 Left!
Price: $96.54
Engine Cylinder Head Gasket
Description: Chrysler 6.4L Apache Gen-3 Hemi .040 " MLS Cylinder Head Gasket, 4.120 " Bore, LHS
Item #: C5027-040
Condition:
New
Limited Supply: Only 2 Left!
Price: $96.54
Engine Cylinder Head Gasket
Description: Chrysler 6.4L Apache Gen-3 Hemi .051 " MLS Cylinder Head Gasket, 4.120 " Bore, LHS
Item #: C5027-051
Condition:
New
Limited Supply: Only 0 Left!
Price: $96.54
Engine Valve Cover Gasket Set
Description: Chrysler Gen-3 Hemi Valve Cover Kit, Valve Cover and Spark Plug Tubes for 1 Head
Item #: C5193
Condition:
New
Limited Supply: Only 3 Left!
Price: $17.64
Engine Camshaft
Description: No Springs Required (NSR) Stage 1 Grind for 5.7L Gen. IV Hemi. Great mid-range torque w/ excellent power. Perfect for heavier vehicles, has great throttle response.
Stage 1 for '11+ 6.4L HEMI available under 201-302-17
Item #: 201-300-17
Condition:
New
Limited Supply: Only 8 Left!
Price: $576.95
Engine Camshaft
Description: No Springs Required (NSR) Stage 1 Grind for 6.4L Gen. IV Hemi. Awesome across the board power increases in NSR cam for 6.4L ONLY!
Stage 1 for '09+ 5.7L HEMI available under 201-300-17
Item #: 201-302-17
Condition:
New
Limited Supply: Only 0 Left!
Price: $576.95
Engine Camshaft
Description: Best average torque & power of any sub .600" lift Gen. IV HEMI cam tested. Runs great from 2500-6500 RPM.
LST lobe profiles and #26918 valve springs allow 7000 RPM+.
Stage 1 for '09+ 5.7L HEMI...More Details »
Item #: 201-303-17
Condition:
New
Limited Supply: Only 2 Left!
Price: $576.95
Engine Camshaft
Description: Best HP of any stock piston hyd. roller cam by taking full advantage of the Gen IV cyl. head high lift airflow. Runs great from 3000-7000 RPM. LST lobe profiles and #7230 valve springs allow 7500...More Details »
Item #: 201-305-17
Condition:
New
Limited Supply: Only 7 Left!
Price: $576.95
Engine Camshaft
Description: Widest torque curve of any camshaft
tested, with impresive low end gains & outsanding
high end performance. Designed for #26918 spring.
Available in a CK-Kit under CK201-304-17, in an MK-Kit under MK201-304-17
Item #: 201-304-17
Condition:
New
Limited Supply: Only 0 Left!
Price: $576.95
Engine Camshaft
Description: Gains in mid range torque and
drastic power increase at high RPM. Works best w/ ported
heads, stroker cranks and other modifications. Designed for
#7230 spring
Available in a CK-Kit under...More Details »
Item #: 201-306-17
Condition:
New
Limited Supply: Only 1 Left!
Price: $576.95
Engine Valve Lifter Kit
Description: This non-link bar hydraulic roller lifter set features short travel. These lifters' short travel allows for light pre-load and reduced oil volume for the highest revving lifters for GEN III...More Details »
Item #: 15821-16
Condition:
New
Limited Supply: Only 0 Left!
Price: $774.95
Engine Camshaft Kit
Description: Best average torque & power of any sub .600" lift Gen. IV HEMI cam tested. Runs great from 2500-6500 RPM.
LST lobe profiles and #26918 valve springs allow 7000 RPM+.
Available in a CK-Kit under CK201-303-17.
Item #: MK201-303-17
Condition:
New
Limited Supply: Only 0 Left!
Price: $1,751.95
Engine Camshaft
Description: Delivers the awesome Thumpr sound from your VVT HEMI with a simple cam, limiter & tune. Excellent performance in the mid to upper RPM with only small losses below 2500 RPM. Phaser limiter or...More Details »
Item #: 201-700-17
Condition:
New
Limited Supply: Only 2 Left!
Price: $576.95
Engine Camshaft
Description: Good improvements over the factory Apache camshaft.
Item #: 201-424-17
Condition:
New
Limited Supply: Only 1 Left!
Price: $576.95
Engine Camshaft
Description: Best all around performance grind for 6.4L applications.
Item #: 201-426-17
Condition:
New
Limited Supply: Only 1 Left!
Price: $576.95
Engine Camshaft
Description: Requires either added displacement or high RPM modifications in street/strip applications.
Item #: 201-428-17
Condition:
New
Limited Supply: Only 8 Left!
Price: $576.95
Coil Spring Set
Description: Lowers 1/4-mile ET's. Maximum Traction. Consistent Launches.
Designed for maximum traction. Ride heights will vary. Tested with factory dampers.
Item #: E32-27-004-02-22
Condition:
New
Limited Supply: Only 1 Left!
Price: $355.00
Coil Spring Lowering Kit
Description: High Performance Handling and Aggressive Good Looks. Lower Center of Gravity. Stop Quicker, Corner Faster Progressive Spring Design for Excellent Ride Quality.
Tested with factory...More Details »
Item #: E10-27-004-01-22
Condition:
New
Limited Supply: Only 2 Left!
Price: $350.00
Manual Transmission Shifter Assembly
Description: Billet Aluminum Base and Stop Collar Steel Gear Select Adjustable Positive Gear Stops Stainless Steel Rotating Pivot Limited Lifetime Warranty
Billet Competition/Plus® Manual Shifter;...More Details »
Item #: 3916020
Condition:
New
Limited Supply: Only 4 Left!
Price: $619.95
Manual Transmission Shifter Assembly
Description: Reduces Shift Throw by Over 30 Percent CNC Machined Billet Aluminum Carrier Modern Billet Pistol Grip Design 6061 Anodized Aluminum Upper Stick Limited Lifetime Warranty
Billet/Plus®...More Details »
Item #: 3916120
Condition:
New
Price: $923.19
