- Home »
- Catalog
Petty's Garage » 2010, Jeep, Wrangler Unlimited Sahara
Products for:
- Years: 2010
- Makes: Jeep
- Models: Wrangler Unlimited Sahara
View Universal items for: 2010 Jeep Wrangler Unlimited Sahara
Browse Products
No Image Available
Axle Housing
Description: Factory-style semi-float design Built-in skimmer" cuts ring gear oil halo and forces it into the pinion bearings Outer pinion bearing pocket features a renewable oil reservoir that sends cool...More Details »
Item #: 3446538
Condition:
New
Price: $5,022.99
Tow Kit
Description: Use these D-Ring Mounts to install recovery D-ring shackles to your JK Wrangler/Unlimited. Works with most aftermarket bumpers.
Item #: 4803300
Condition:
New
Price: $56.99
No Image Available
Steering Tie Rod Assembly
Description: HD Forged Drag Link Flip Kit (# 1853930) Joint is pressed into rod end housing and secured w/ snap ring Provides clearance for factory 17" wheels HD Chromoly Tie Rod Kit (# 1853910) HD 1-5/8"...More Details »
Item #: 1853905
Condition:
New
Price: $972.99
Suspension Stabilizer Bar Kit
Description: stability during side hill Twist clockwise for trail use eliminates tire/sway bar interference off-camber to maintain vehicle control 22-spline/heat-treated 4340 chromoly steel HD...More Details »
Item #: 1753720
Condition:
New
Price: $1,083.99
Suspension Stabilizer Bar Kit
Description: stability during side hill Twist clockwise for trail use eliminates tire/sway bar interference off-camber to maintain vehicle control 22-spline/heat-treated 4340 chromoly steel HD...More Details »
Item #: 1753725
Condition:
New
Price: $1,083.99
Bumper
Description: factory fog lights for factory styling increased radiator air flow Compatible Center bolt pattern fits all major winch models textured black powder coat finish 100% bolt-on installation...More Details »
Item #: 4653200
Condition:
New
Price: $1,162.99
Bumper
Description: factory fog lights for factory styling increased radiator air flow Compatible Offset bolt pattern fits all major winches textured black powder coat finish 100% bolt-on installation Lifetime...More Details »
Item #: 4653100
Condition:
New
Price: $1,162.99
No Image Available
Bumper
Description: 1.75" mandrel bent hoop w/ laser cut gussets adds extra brush guard protection Center bolt pattern fits all major winch models w/ center bolt pattern - including larger Warn Zeon Winch mount...More Details »
Item #: 4653230
Condition:
New
Price: $1,408.99
No Image Available
Bumper
Description: 1.75" mandrel bent hoop w/ laser cut gussets adds extra brush guard protection Offset bolt pattern fits all major winches w/ offset bolt pattern - including larger Warn Powerplant Winch mount...More Details »
Item #: 4653130
Condition:
New
Price: $1,408.99
Bumper
Description: factory fog lights for factory styling Offset bolt pattern fits all major winches textured black powder coat finish 100% bolt-on installation Lifetime warranty on bumper defects 90-day...More Details »
Item #: 4653120
Condition:
New
Price: $567.99
No Image Available
Bumper
Description: 1.75" mandrel bent hoop w/ laser cut gussets adds extra brush guard protection Offset bolt pattern fits all major winches w/ offset bolt pattern - including larger Warn Powerplant Integrated...More Details »
Item #: 4653170
Condition:
New
Price: $813.99
Winch Mount Plate
Description: Offset bolt pattern fits all major winches Constructed from reinforced 1/4"-thick steel offset bolt pattern - including larger Warn Powerplant Required to add a winch to the RockGuard Explorer...More Details »
Item #: 4638420
Condition:
New
Price: $88.99
No Image Available
Steering Linkage Conversion Kit
Description: Installation does not require any cutting or removal of factory bracketry HD Forged Drag Link Flip Kit (# 1853930) Joint is pressed into rod end housing and secured w/ snap ring Provides...More Details »
Item #: 1600450
Condition:
New
Price: $814.99
Coil Spring Retainer
Description: TeraFlex JK: Coil Spring Retainers are essential during rapid suspension cycling to prevent the spring from unloading causing rotation or shifting. Precision cut and zinc plated for durability.
Item #: 4951000
Condition:
New
Price: $33.99
Axle Differential Repair Sleeve Kit
Description: TeraFlex JK: Front Axle Inner Sleeve Kits reinforce the weak axle tubing on JK Wrangler/Unlimited Dana 30 or Dana 44 factory axles. This prevents unwanted bending or breaking under extreme conditions.
Item #: 4990700
Condition:
New
Price: $111.99
Disc Brake Upgrade Kit
Description: Dual-piston calipers for increased clamping force Larger 13.3" rotors for superior stopping performance (vs increased pad life 17" Rotors feature dual bolt patterns 5x5.5" Improved braking...More Details »
Item #: 4303420
Condition:
New
Price: $955.99
Disc Brake Upgrade Kit
Description: Dual-piston calipers for increased clamping force Larger 13.3" rotors for superior stopping performance (vs increased pad life 17" Rotors feature dual bolt patterns 5x5.5" Improved braking...More Details »
Item #: 4303400
Condition:
New
Price: $921.99
Disc Brake Upgrade Kit
Description: 17" Rotors feature dual bolt patterns No brake bleeding or brake line modification needed Larger 13.3" rotors for superior stopping performance Slotted rotors offer better gas dissipation than...More Details »
Item #: 4303490
Condition:
New
Price: $393.99
Disc Brake Upgrade Kit
Description: 17" Rotors feature dual bolt patterns No brake bleeding or brake line modification needed Larger 13.3" rotors for superior stopping performance 11.9" stock rotors, Mill-balanced vented front...More Details »
Item #: 4303480
Condition:
New
Price: $365.99
Axle Differential Repair Sleeve Kit
Description: TeraFlex JK: Front Axle Inner Knuckle Gusset Kits reinforce the weak knuckles on JK Wrangler/Unlimited Dana 30 or Dana 44 factory axles. This prevents unwanted bending or breaking under extreme conditions.
Item #: 4990910
Condition:
New
Price: $57.99
Axle Differential Repair Sleeve Kit
Description: TeraFlex JK: Front Axle Inner Knuckle Gusset Kits reinforce the weak knuckles on JK Wrangler/Unlimited Dana 30 or Dana 44 factory axles. This prevents unwanted bending or breaking under extreme conditions.
Item #: 4990800
Condition:
New
Price: $54.99
No Image Available
Suspension Control Arm
Description: JK Alpine Long Control Arms: Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance Anodized 6061-T6 aluminum clamp collar to...More Details »
Item #: 1315500
Condition:
New
Price: $495.99
No Image Available
Suspension Control Arm Kit
Description: JK Alpine Short Control Arms: Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance Anodized 6061-T6 aluminum clamp collar to...More Details »
Item #: 1415500
Condition:
New
Price: $357.99
Axle Bracket
Description: These weld-on TeraFlex JK: Front Lower Control Arm Skid Plates strengthen the lower control arm assembly against bending, while protecting the arms from damage. The CNC cut brackets are constructed from 1/4 thick steel.
Item #: 4937330
Condition:
New
Price: $19.99
No Image Available
Suspension Control Arm Kit
Description: Preset Sport Control Arms balance caster and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 2.5-3" lift kits Sport Control...More Details »
Item #: 1252000
Condition:
New
Price: $245.99
Coil Spring Retainer
Description: TeraFlex JK: Coil Spring Retainers are essential during rapid suspension cycling to prevent the spring from unloading causing rotation or shifting. Precision cut and zinc plated for durability.
Item #: 4951300
Condition:
New
Price: $12.99
No Image Available
Drive Axle Shaft
Description: Constructed from high-strength dual-heat treated 4340 chromoly steel For use w/ heavy-duty TeraFlex axle shafts Compatible w/ larger Dana 1350-series U-joint.
Replace your weak stock front...More Details »
Item #: 3304104
Condition:
New
Price: $151.99
Suspension Track Bar Bracket
Description: Beef up your stock front track bar bracket with the TeraFlex JK: Front Track Bar Bracket Gusset. Prevents egging out of the mounting hole. A loose track bar can cause crucial suspension points to...More Details »
Item #: 4951800
Condition:
New
Price: $13.99
Suspension Track Bar Bracket
Description: other front-end issues Installation does not require any cutting or removal of factory bracketry Frame end Front Track Bar Drop Bracket corrects steering geometry Multiple track bar mounting...More Details »
Item #: 1953000
Condition:
New
Price: $167.99
No Image Available
Suspension Control Arm Kit
Description: JK Alpine Short Control Arms: Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance Anodized 6061-T6 aluminum clamp collar to...More Details »
Item #: 1415520
Condition:
New
Price: $344.99
Shock Absorber Relocation Bracket
Description: Use these bolt-on JK: Shock Extensions to optimize extended and collapsed lengths of factory length shocks with a 2-2.5 lift kit. A must to restore proper handling on your lifted JK...More Details »
Item #: 1553800
Condition:
New
Price: $42.99
No Image Available
Suspension Control Arm Kit
Description: Preset Sport Control Arms balance caster and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 2.5-3" lift kits Sport Control...More Details »
Item #: 1252200
Condition:
New
Price: $221.99
Suspension Ball Joint
Description: Factory-style serrated flanged castle nut Low-profile single lip dust seal prevents contaminants 30mm (1.18") adjustable ball stud for accurate initial Heat treated 4140 chromoly ball/stud out...More Details »
Item #: 3440000
Condition:
New
Price: $155.99
Suspension Ball Joint
Description: Factory-style serrated flanged castle nut Low-profile single lip dust seal prevents contaminants 30mm (1.18") adjustable ball stud for accurate initial Heat treated 4140 chromoly ball/stud out...More Details »
Item #: 3442002
Condition:
New
Price: $307.99
Suspension Ball Joint
Description: Factory-style serrated flanged castle nut Low-profile single lip dust seal prevents contaminants 30mm (1.18") adjustable ball stud for accurate initial Heat treated 4140 chromoly ball/stud out...More Details »
Item #: 3440020
Condition:
New
Price: $155.99
Suspension Ball Joint
Description: Factory-style serrated flanged castle nut Low-profile single lip dust seal prevents contaminants 30mm (1.18") adjustable ball stud for accurate initial Heat treated 4140 chromoly ball/stud out...More Details »
Item #: 3442022
Condition:
New
Price: $307.99
No Image Available
Steering Tie Rod Assembly
Description: Installation does not require any cutting or removal of factory bracketry HD Chromoly Tie Rod Kit (# 1853910) Steering Stabilizer Relocation Mount Bracket Kit - HD Tie Rod (# 1123160) Steering...More Details »
Item #: 1853910
Condition:
New
Price: $541.99
No Image Available
Steering Tie Rod Assembly
Description: HD Forged Drag Link Kit - (# 1853920) HD 1-5/8" O.D. 4140 heat treated chromoly steel More than 200% stronger than factory tie rod Forged tie rod housing designed specifically for JK...More Details »
Item #: 1853900
Condition:
New
Price: $972.99
Suspension Track Bar
Description: responsive control maintenance-free factory-style bushings an additional rate plate for superior handling the raised front track bar bracket on our Tera HD Front Axles as well as the Front...More Details »
Item #: 1753418
Condition:
New
Price: $322.99
Suspension Track Bar
Description: responsive control maintenance-free factory-style bushings an additional rate plate for superior handling HD Forged Adjustable Track Bars are 230% stiffer than factory track bars - making them...More Details »
Item #: 1754418
Condition:
New
Price: $310.99
No Image Available
Steering Tie Rod Assembly
Description: Relocates drag link over the knuckle to the top of the knuckles steering arm (Left-Hand-Drive only) Provides clearance for factory 17" wheels Axle end joint is flipped 180 degrees to be pressed...More Details »
Item #: 1853930
Condition:
New
Price: $467.99
No Image Available
Steering Tie Rod Assembly
Description: Bolts directly to new High Steer Knuckle (not included) 50% stiffer than factory drag link to help eliminate front end shimmy and other alignment issues 1.25" O.D. fully forged drag link...More Details »
Item #: 1853920
Condition:
New
Price: $467.99
No Image Available
Steering Linkage Conversion Kit
Description: Installation does not require any cutting or removal of factory bracketry Cast from HD ductile iron Reinforces key section areas prone to stress and deflection Maintains correct steering...More Details »
Item #: 4390870
Condition:
New
Price: $614.99
No Image Available
Steering Linkage Conversion Kit
Description: Addresses all the front-end steering issues associated with lifted JK Wrangler/Unlimited models Installation does not require any cutting or removal of factory bracketry Check the individual...More Details »
Item #: 4391000
Condition:
New
Price: $1,938.99
No Image Available
Steering Linkage Conversion Kit
Description: Addresses all the front-end steering issues associated with lifted JK Wrangler/Unlimited models Installation does not require any cutting or removal of factory bracketry Check the individual...More Details »
Item #: 4390975
Condition:
New
Price: $1,429.99
No Image Available
CV Joint Repair Kit
Description: The TeraFlex JK: Factory Replacement High-Angle Rzeppa CV Joint Kit replaces a worn or damaged factory Rzeppa CV joint and driveshaft without resorting to an expensive aftermarket U-joint upgrade.
Item #: 1744014
Condition:
New
Price: $184.99
No Image Available
Suspension Control Arm Bushing Kit
Description: Direct replacement for factory-style control arm bushings Inner sleeve provides 360 degrees of rotation for unrestricted movement at full droop Rotating sleeve features an extremely tough,...More Details »
Item #: 1952701
Condition:
New
Price: $800.99
No Image Available
Suspension Control Arm Bushing Kit
Description: Direct replacement for factory-style control arm bushings Inner sleeve provides 360 degrees of rotation for unrestricted movement at full droop Rotating sleeve features an extremely tough,...More Details »
Item #: 1952700
Condition:
New
Price: $800.99
License Plate Bracket
Description: This Alpha License Plate & 3rd Brake Light Mount Bracket Kit relocates your license plate and 3rd brake light from their vulnerable stock location to the Alpha HD Adjustable Spare Tire Mounting Kit.
Item #: 4838162
Condition:
New
Price: $60.99
No Image Available
License Plate Bracket
Description: This Alpha License Plate & 3rd Brake Light Mount Bracket Kit relocates your license plate and 3rd brake light from their vulnerable stock location to the Alpha HD Adjustable Spare Tire Mounting Kit.
Item #: 4838163
Condition:
New
Price: $32.99
License Plate Bracket
Description: This Alpha License Plate & 3rd Brake Light Mount Bracket Kit relocates your license plate and 3rd brake light from their vulnerable stock location to the Alpha HD Adjustable Spare Tire Mounting Kit.
Item #: 4838165
Condition:
New
Price: $32.99
Bumper
Description: Alpha HD Hinged Spare Tire Carrier & Alpha HD Adjustable Spare Tire Mount Kit Steel Factory fog light mounts for increased auxiliary lighting Recessed spare tire well Compatible textured black...More Details »
Item #: 4654130
Condition:
New
Price: $1,259.99
Bumper
Description: Recessed spare tire well Recessed spare tire well Compatible Alpha HD Hinged Spare Tire Carrier & Alpha HD Adjustable Spare Tire Mount Kit Steel textured black powder coat finish 100% bolt-on...More Details »
Item #: 4654100
Condition:
New
Price: $1,162.99
No Image Available
Suspension Multi-Purpose Bumper Stop Kit
Description: JK specific tuned for high-speed performance Will not fade or dissipate under extended heavy use Unaffected by temperature extremes - retains flexibility in thermal or subzero temps Resistant...More Details »
Item #: 1958200
Condition:
New
Price: $295.99
No Image Available
Suspension Multi-Purpose Bumper Stop Kit
Description: JK specific tuned for high-speed performance Will not fade or dissipate under extended heavy use Unaffected by temperature extremes - retains flexibility in thermal or subzero temps Resistant...More Details »
Item #: 1958150
Condition:
New
Price: $156.99
Suspension Multi-Purpose Bumper Stop Kit
Description: Subzero temperature flexibility reduces fatigue Performance-tuned closed-cell nitrogen charged microcellular polyurethane technology Absorbs large impact energy progressively during compression...More Details »
Item #: 1958252
Condition:
New
Price: $148.99
No Image Available
Suspension Stabilizer Bar Disconnect Kit
Description: Minimize the time it takes to go from the highway to off-road and back by converting your existing sway bar links to Quick Disconnects with the TeraFlex JK: Front Sway Bar Quick Disconnect Upgrade Kit.
Item #: 600093
Condition:
New
Price: $59.99
No Image Available
Steering Stabilizer Bracket
Description: Quickly bolt a PSC hydraulic ram assist to your steering system with this Hydraulic Ram Assist Steering Bracket and Tie Rod Clamp. Fits Tera60 Front Axles with fixed Heim-style hydraulic steering ram ends.
Item #: 3944758
Condition:
New
Price: $197.99
No Image Available
Axle Bracket
Description: Quickly bolt a PSC hydraulic ram assist to your steering system with this Hydraulic Ram Assist Steering Bracket and Tie Rod Clamp. Fits Tera60 Front Axles with adjustable Heim-style hydraulic steering ram ends.
Item #: 3944755
Condition:
New
Price: $167.99
No Image Available
Disc Brake Upgrade Kit
Description: Min. Wheel Diameter: 17" Rotors feature dual bolt patterns - 5x5" and 5x5.5" Improved braking performance over factory brake system 100% bolt-on upgrade w/ basic hand tools Brake caliper...More Details »
Item #: 4304460
Condition:
New
Price: $520.99
