Home - Return to Previous Page
Additional Images

Edelbrock Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8 | 7122

Engine Camshaft and Lifter Kit

7122

Edelbrock part #7122 Performer RPM Camshaft is designed for small-block Ford 289-302 V-8 applications. This Edelbrock cam kit produced 367 HP & 340 ft-lbs. of torque when used with #7121 intake and #60259 cylinder heads on a 302 engine.

Limited Supply: only 3 remaining
NOTE: This product has the following shipping restriction(s):
  • Due to current restrictions we are unable to ship this product to MA, HI,- Shipping Availability Coming Soon
Pricing: $428.95

Qty:
NOTE: This product has the following shipping restriction(s):
  • Due to current restrictions we are unable to ship this product to MA, HI,- Shipping Availability Coming Soon
Free Shipping!

Description

Edelbrock part #7122 Performer RPM Camshaft is designed for small-block Ford 289-302 V-8 applications. This Edelbrock cam kit produced 367 HP & 340 ft-lbs. of torque when used with #7121 intake and #60259 cylinder heads on a 302 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 224 degrees - Duration @ .050 Exhaust: 234 degrees - Lift @ Valve Intake: .496" - Lift @ Valve Exhaust: .520" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 11"

Additional Details

Ford:Small-Block Windsor:260 (4.3L)/289 (4.7L)/302 (5.0L)

Recommended Valve Springs for OEM heads: Edelbrock part #5722; Not for 1985-later engines with roller lifters.; Screw-in studs, guide plates and adjustable rocker arms required.; For non-computer controlled vehicles; Use only stock ratio rocker arms; Adjustable valvetrain required; In order for this Performer RPM cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs or equivalent.; Do not use rotator type valve springs or retainers for this application.; Oil/additive must contain Zinc designed for use with flat tappet camshafts.; Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up.; Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 14.4 lbs.
  • W25.3000” x H5.3000” x L2.8000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.